ProSport SeriesRecreational Sport Fishing & BoatingOn-Board Marine Battery ChargerAmps: 20Banks: 3Volts: 12/24/36Cable Size: 6'/6'/6'Distributed-On-Demand TechnologyAutomatica Multi-Stage ChargingExtruded Aluminum HousingWaterproof and Shock ResistantLead Acid / Gel Battery SelectableDynamic Thermal Output ControlBuilt-in ProtectionLED Power and Charge IndicatorsPre-wired for Easy Installation2 Year Warranty Automatically senses and distributes 100% of available charging amps to any one bank or combination of all banks, Charges and conditions batteries with a built in safe maintenance mode for long and short term storage, For superior heat transfer and durability, Saltwater tested for coastal sportfishing and boating, One time user selector provides optimum charge for either battery type, Provides appropriate charging amps to your batteries while maintaining recommended charger temperature, Reverse Polarity, Ignition & temperature protection, At-a-glance power and charging status

View Product

10 Amp Battery ChargerPart No. 2610ADescriptionTotal Amps: 10Number of Outputs: 2Amps per output: 5/5Battery System: 2-12VOutput Voltage: 12VDC Output: Studs for hardwireInput Voltage: 100-130VDC/60HzAC: Studs for hardwireDimensions: 7.75" x 5.50" x 2.42"Weight: 5.6 Lbs.Product FeaturesIgnition ProtectedReverse Polarity ProtectedShort Circuit Protected3-Stage Switching Electronic CircuitMaintenance Mode protects batteries during storageFully Potted to Waterproof ElectronicsVibration and Shock ProtectedSelf-Protecting under extreme ambient conditionsFor Flooded, Gel and AGM Batteries2 - Year Limited WarrantyLifetime Warranty Against Water DamageMeets all Guest Harsh Environment GuidelinesCharges two independent 12 volt batteries

View Product

30 Amp Battery ChargerPart No. 2632ADescriptionTotal Amps: 30 AmpsNumber of Outputs: 3Amps per Output: 20/5/5Battery System: 3-12VOutput Voltage: 12VDC per outputDC Output: Studs w/circuit breakersInput Voltage: 100-130VAC/50-60HzInput Connection: Studs for HardwireDimensions: 12.96" x 9.84" x 2.92"Weight: 15.6 LbsProduct Features Ignition Protected, Reverse Polarity Protected, Short Circuit Protected, 3-Stage Switching Electronic Circuit, Maintenance Mode protects batteries during storage, Fully Potted to Waterproof Electronics, Vibration and Shock Protected, Self-Protecting under extreme ambient conditions, For Flooded, Gel and AGM Batteries, 2 - Year Limited Warranty, Lifetime Warranty Against Water Damage, Meets all Guest Harsh Environment Guidelines

View Product

6 Amp Battery ChargerPart No. 2608AFeatures: For flooded, Gel and AGM Batteries, Full Potted to Waterproof Electronics, Maintenance mode protects batteries during storage, Total Amps: 6, Battery System: 1-12V, Output Voltage: 12VDC, Input Voltage: 100 130VDC/60Hz, Input Connection: 6' AC cord w/Connect Charge Plug, DC: 4' w/ring terminals, Dimensions: 6.40" x 3.50" x 2.25", Weight: 2.0 lbs., Vibration and Shock Protected

View Product

10 Amp Battery ChargerPart No. 2611ADescriptionTotal Amps: 10Number of Outputs: 2Amps per output: 5/5Battery System: 2-12V or 24VOutput Voltage: 12VDC Output: 2-4' Cables w/ring terminalsInput Voltage: 100-130VDC/50-60HzAC Input: 6' cord W/Connect Charge PlugDimensions: 7.75" x 5.50" x 2.42"Weight: 5.6 Lbs.Product FeaturesIgnition ProtectedReverse Polarity ProtectedShort Circuit Protected3-Stage Switching Electronic CircuitMaintenance Mode protects batteries during storageFully Potted to Waterproof ElectronicsVibration and Shock ProtectedSelf-Protecting under extreme ambient conditionsFor Flooded, Gel and AGM Batteries2 - Year Limited WarrantyLifetime Warranty Against Water DamageMeets all Guest Harsh Environment GuidelinesModels with AC Cables can be used with the ConnectCharge permanent mounting system

View Product

30 Amp Battery ChargerPart No. 2631ADescriptionTotal Amps: 30 AmpsNumber of Outputs: 3Amps per output: 10/10/10Battery System: 3-12V or 1-24V & 1-12V or 1-36VOutput Voltage: 12VDC per outputDC Output: 3-6' DC outputs w/ring terminalsInput Voltage: 100-130VAC/50-60HzInput Connction: 6' cord w/Connect Charge plugDimensions: 13.0" x 7.0" x 2.60"Weight: 13 Lbs.Product Features Ignition Protected, Reverse Polarity Protected, Short Circuit Protected, 3-Stage Switching Electronic Circuit, Maintenance Mode protects batteries during storage, Fully Potted to Waterproof Electronics, Vibration and Shock Protected, Self-Protecting under extreme ambient conditions, For Flooded, Gel and AGM Batteries, 2 - Year Limited Warranty, Lifetime Warranty Against Water Damage, Meets all Guest Harsh Environment Guidelines, Each output is an independent charging system, insuring individual attention to each battery

View Product

25 Amp Battery Charger2623AProduct Features: Total Amps: 25Amps, Number of Outputs: 3, Amps per output: 10/10/5, Battery System: 2-12V or 1-24V, Output Voltage: 12VDC per output, DC Output: 3-6' DC output cables w/terminal rings, Input Voltage: 100-130VAC/50-60Hz, Input Connection: 6' AC Cord w/Connect Charge Plug, Dimensions: 13.0" x 7.0" x 2.60", Weight: 13 Lbs., Ignition Protected, Reverse Polartity Protected, Short Circuit Protected, 3-Stage Switching Electronic Circuit, Maintenance Mode protects batteries during storage, Fully Potted to Waterproof Electronics, Vibration and Shock Protected, Self-Proctecting under extreme ambient conditions, For Flooded, Gel and AGM Batteries, 2 - Year Limited Warranty, Lifetime Warranty Against Water Damage, Meets all Guest Harsh Environment Guidelines, Models with AC Cables can be used with the ConnectCharge permanent mounting system

View Product

20-amp output, 2 banks, 10 amps each, 2-12V or 24V system, 5-6 hour recovery time. Full-time maintenance function. Unit comes complete with pre-wired 6-foot AC cord and 2 6-foot DC outputs with ring terminals. Waterproof, fully-encapsulated electronics. Lifetime warranty against internal water damage.

View Product

Designed for use on small aluminum fishing boats equipped with some electronics and a trolling motor, these 6 amp units are waterproof, shockproof and corrosion-proof. Model #2607 comes prewired with a 6 ft. AC cord and two 4 ft. DC output cords, 3 amps each, for a two battery 12 or 24 volt system. Model #2608 is prewired with a 6 ft. AC cord and one 4 ft. DC output for single battery applications. Full-time maintenance function, Waterproof, fully-encapsulated electronics, Model #2607 has an 18-24 hour recovery time, Model #2607 has an 8-10 hour recovery time

View Product