- Stainless Mounting Bracket
- Steel Mounting Bracket
- Kit Mounting Bracket
- Garmin Mounting Bracket
- Small Mount Bracket
- Cable Mounting Bracket
- Flat Mounting Bracket
- Adventure Marine Bracket
- Slr Flash Bracket
- Brushed Mount Bracket
- Perko Light Bracket Assy F Vert Mount
- Lumitec Capri Led White Flood Light Flush
- E.s Ritchie Hb Helmsman Steel Boat
- Seasucker Medium Table With L Bracket
- Lumitec Caprera Led Flood Light Bracket Mount
- Hella Model Navigation Lights Deck Mount
- Ogm Led Stern Light W Mounting Bracket
- Dorcy Led Wireless Motion Sensor Flood Lite
- Aqua Series Mounting Brackets Stern
- Lees Tackle Clamp On Light Bracket Lt52001
Swivel Mounting Bracket
MARINE SWIVEL MOUNTING BRACKET (REPLACEMENT)
Shakespeare Style 410-R Mounting KitCombines the Style 91 Swivel Mount with the Shakespeare Style 408-R Insulated Stand-off Bracket. The molded upper bracket features an insert to accept 1" or 1 1/2 " diameter antennas or extension masts. Includes an 1 1/8" insert. The swivel mount is stainless steel construction.
Bolt-on, zinc plated, side winding swing away jack, 1000 lb. capacity, 6" wheel, 10" of travel, Fits up to 3" x 5" tongues, Mounting hardware included, Bracket to bottom retracted: 12-3/4", Bracket to bottom extended: 22-7/8", Bracket to top: 11-3/4"
Shakespeare Style 81-S Stainless Steel Swivel MountShakespeare's Style 81-S Swivel Mount is a dual-joint, free-pivoting base mount for use with an appropriate Shakespeare upper bracket in deck or side mounting large or small antennas. The mount's versatile action fits almost any mounting location, and permits easy lowering of the antenna for clearing overhead obstruction. It requires a stand-off upper bracket.The Style 81-S Swivel Mount is included in the Style 410-R Mounting Kit. Stainless steel construction, Standard 1" - 14 threads
1028Gimbal Mount 9"Fits into a boat's flush mount rod holder. Eliminates drilling holes and permanent mounting of downrigger brackets on boat. Made from welded stainless steel and modified nylon for the ultimate in strength and durability. For use with metal flush mount rod holders.Fits all Scotty downriggers and can be used with No. 1026 Pedestal Swivel MountDimensions: 6 1/8" x 7 1/8" x 9" x 1 1/2"
Mounting kit contains: (1) style 81-S Swivel Mount and (1) style 408-R Plastic Stand-Off Bracket Stainless steel swivel mount; dual joint, free-pivoting, and allows easy lowering of antenna for clearing overhead obstructions; for deck or side mounting White molded plastic stand-off bracket; insulated and corrosion resistant; easy opening for quick laydown Standard 1-14 threads For 1 (using insert provided) or 1- 1/2 diameter antennas or extension masts
"Wall Mount Bracket"
The LA-10C is the most versatile of all the simple brackets. There are two plates, one for the wall and the other for the LCD TV. You simply mount the wall plate to the wall, and the 100mm Vesa mount to the rear of the LCD TV. Then slide the LCD TV onto the wall bracket. The plate is designed with a long wedge shape which allows the LCD TV to remain fixed to the wall under the most adverse conditions.This is the plate which can be used with the LA-55-2 and LA-55-3. Weight Capacity: 20 kg (44 lbs), Screen Size: 26", Material: Iron, Mounting Option: Fixed Wall Mount, Sits: 31 mm from the wall, Display Capacity: VESA 100/100mm
This table is the same as SeaSucker's Medium Table with 6" SeaSucker, but with a different mount - instead of attaching the SeaSucker directly to your gunwale, this table has an "L" bracket that allows you to mount the included 4A1/2" SeaSucker to the inside wall in a vertical position while the table sits on a horizontal surface. Use this custom-designed table to cut bait and rig lines, to filet your catch or to serve it up to your guests. Made of 1/2" white starboard, this table is incredibly sturdy. Open corners allow you to easily dispose of waste overboard and knife slots in the back corners provide convenient and safe storage. Work surface is approximately 22" x 12".
"Aluminum Mounting Bracket"
Clamp-On AccessoryFits: 1.050" PipeMounts: Horizontal/VerticalFinish: SilverHeavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit.
Designed to attach directly to a vertical transom. Made of strong, lightweight marine grade aluminum, powder coated in white for maximum corrosion resistance. Reinforced polypropylene mounting board is 1- 1/2 thick with all stainless steel fasteners. Does not include mounting fasteners. Note: The use of a safety chain is recommended on all motor brackets.
The RAM-B-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 1" rubber ball and flat 6.25" x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles. For most applications, mount will support up to ten pounds. Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag. For mounting a GPS puck antenna to this mount, RAM recommends the RAM-338U
"Light Mounting Bracket"
Allows for mounting video light or microphone. Helps hold mini camcorders steady.
Mount tail lights high and dry! Includes (2) 2-3/4"x6" galvanized brackets & hardware for easy mounting to our boat guide upright posts (does not include lights or wiring).
Battery Navigation Light Requires 4 AA batteries (not included), Molded one piece body construction, Shock resistant neoprene accents, Incandescent or LED available, Rated at 100,000 hours LED service life, LED uses 90% less energy than incandescent, Sealed heavy duty On/Off switch, Insert molded brass threaded mounting bushings, Removable lamp carriage assembly, 6.18" x 2.53"
"Steel Mounting Bracket"
M1 Mounting Bracket, you can mount the antenna with any standard stainlessantenna mount available from your local marine equipment supplier! Use this bracket with a standard threaded steel mount (1"-14 threads) to make the TracVision M1 a drop-in replacement for a Shakespeare SeaWatch or Glomex off-air antenna. Just thread the mounting nut and mounting bracket onto the antenna mount, then screw the antenna to the mounting bracket - that's all there is to it!
This marine grade floodlight has a solid glass lens, a stainless steel mounting bracket and a 55 watt halogen bulb.
This marine grade floodlight has a solid glass lens, a stainless steel mounting bracket and a 55 watt halogen bulb.
"Vertical Mounting Bracket"
With their stainless steel housing, the Series 50 is Aqua Signal's premium series. These lights combine striking appearance with exceptional quality and durability. They are designed for all vessels less than 65.6 feet (20 meters) in length. On Series 50 lights the wires exit from the bottom of the fixture. Bulb changing is easy and requires no tools. Simply loosen the knurled collar on the bottom of the fixture, and the socket and bulb drop out the bottom. Minimum visibility is 2 nm and 3 nm for masthead lights; waterproof to IP56 standards (withstands power water jetting). Elegant stainless steel, saltwater resistant, non-magnetic housing Acrylic Fresnel lens provides proper beam distribution Mounting: a variety of mounting brackets are available Bulb: special vertical tungsten filament with BAY 15d bayonet socket Clearwhite lights (except masthead) use: 10 watt bulb Masthead colored lights use: 25 watt bulb Sold with 12 volt bulb included; ...
Side Mount BracketPermits small Rule bilge pumps to be side mounted to a vertical stringer, a bulkhead or a transom. Use this bracket when bottom mounting is inconvenient or impossible. Simply remove the strainer from the pump, put the bracket in place, and reassemble.For flow rates 500 - 1100 gph
