- Light Mounting Bracket
- Stainless Mounting Bracket
- Adjustable Mounting Bracket
- Kit Mounting Bracket
- Cable Mounting Bracket
- Swivel Mounting Bracket
- Flat Mounting Bracket
- Garmin Mounting Bracket
- 8 Ohm Frequency Response Speaker
- Adventure Marine Bracket
- Lees Tackle Rod And Reel Hanger Set
- Sea Dog Rail Mount
- Minn Kota Trolling Motor
- Lenco Standard Lower Mounting Bracket Bolt
- Seasucker Medium Table With L Bracket
- Sea Dog Transom Mount Fixed Motor Bracket
- Level Mount Satellite Speaker Wall Ceiling Brackets
- Mooring Buoys Deluxe
- Lenco Standard Upper Mounting Bracket Screw
- Sea Dog Rail Mount Antenna Base
Speaker Mounting Bracket
A four-inch, 4-ohm, deluxe speaker with Mylar cone and white plastic cabinet for protection against moisture. Comes with a swivel mounting bracket, hardware mounting kit and six feet of cable with mini phone plug installed. Sold by the each Power input: 8 watts (RMS) maximum
A 2.25 external speaker with Mylar cone in a compact white housing to withstand the rigors of the marine environment. Comes with a ratchet-action mounting bracket, hardware mounting kit and six feet of cable with mini phone plug installed. Sold by the each 4 ohm speaker Input power up to 5 watts (RMS)
White, water-resistant, cycolac case 5 watt speaker is compatible with all VHF radios. 4 ohms. Comes equipped with 9.5' cable, plug, stainless steel mounting bracket and hardware. Size 5" x 5"
Main Features Manufacturer: Pyle Audio, Inc, Manufacturer Part Number: PLMRW65, Manufacturer Website Address: www.pyleaudio.com, Product Model: PLMRW65, Packaged Quantity: 2, Product Type: Speaker, Output Power: 200W (PMPO), Driver Type: 6.5" Tweeter, 0.5" Tweeter, Frequency Response: 70Hz to 20kHz, Impedance: 4 Ohm, Material: Plastic - Enclosure, Dimensions: 8.75" Height x 8.75" Width x 10.25" Depth, Weight: 25 oz - Magnet Structure, Package Contents:, Hydra PLMRW65 Wake Board Speaker, Spring Loaded Mounting Bracket, Additional Information:, Excellent For Monitor or Surround Sound Applications, Water Resistant Construction Design, Poly Mica Woofer Cone, Butyl Rubber Surround, Polymer Dome Tweeter, Gold Plated Plug Terminals, Standard Warranty: 1 Year(s) Limited, Parts Warranty/Labor: 1 Year(s)
5" Weatherproof PA Speaker w/ Plastic Base(SPC5P)Our 5 inch PA speaker is weatherproof and has a white ABS plastic base that pivots 90 degrees. It offers a frequency response of 300 to 15 kHz and a 15 watt maximum power rating. It features a sensitivity of 105 dB with an impedance of 8 ohm. The pivoting mounting bracket is included. Complete with 10 ft. cord and 3.5mm plug.
"Swivel Mounting Bracket"
MARINE SWIVEL MOUNTING BRACKET (REPLACEMENT)
Bolt-on, zinc plated, side winding swing away jack, 1000 lb. capacity, 6" wheel, 10" of travel, Fits up to 3" x 5" tongues, Mounting hardware included, Bracket to bottom retracted: 12-3/4", Bracket to bottom extended: 22-7/8", Bracket to top: 11-3/4"
1028Gimbal Mount 9"Fits into a boat's flush mount rod holder. Eliminates drilling holes and permanent mounting of downrigger brackets on boat. Made from welded stainless steel and modified nylon for the ultimate in strength and durability. For use with metal flush mount rod holders.Fits all Scotty downriggers and can be used with No. 1026 Pedestal Swivel MountDimensions: 6 1/8" x 7 1/8" x 9" x 1 1/2"
"Aluminum Mounting Bracket"
No. 1021Portable mounting option that's great for aluminum boats. Double stainless steel bolts and black anodized aluminum. 2" clamp opening. Includes stainless steel bolts to fasten mounting bracket.Dimensions: 5 5/8" x 4 3/4" x 3 1/8"
Designed to attach directly to a vertical transom. Made of strong, lightweight marine grade aluminum, powder coated in white for maximum corrosion resistance. Reinforced polypropylene mounting board is 1- 1/2 thick with all stainless steel fasteners. Does not include mounting fasteners. Note: The use of a safety chain is recommended on all motor brackets.
The RAM-B-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 1" rubber ball and flat 6.25" x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles. For most applications, mount will support up to ten pounds. Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag. For mounting a GPS puck antenna to this mount, RAM recommends the RAM-338U
"Wall Mount Bracket"
The LA-10C is the most versatile of all the simple brackets. There are two plates, one for the wall and the other for the LCD TV. You simply mount the wall plate to the wall, and the 100mm Vesa mount to the rear of the LCD TV. Then slide the LCD TV onto the wall bracket. The plate is designed with a long wedge shape which allows the LCD TV to remain fixed to the wall under the most adverse conditions.This is the plate which can be used with the LA-55-2 and LA-55-3. Weight Capacity: 20 kg (44 lbs), Screen Size: 26", Material: Iron, Mounting Option: Fixed Wall Mount, Sits: 31 mm from the wall, Display Capacity: VESA 100/100mm
This table is the same as SeaSucker's Medium Table with 6" SeaSucker, but with a different mount - instead of attaching the SeaSucker directly to your gunwale, this table has an "L" bracket that allows you to mount the included 4A1/2" SeaSucker to the inside wall in a vertical position while the table sits on a horizontal surface. Use this custom-designed table to cut bait and rig lines, to filet your catch or to serve it up to your guests. Made of 1/2" white starboard, this table is incredibly sturdy. Open corners allow you to easily dispose of waste overboard and knife slots in the back corners provide convenient and safe storage. Work surface is approximately 22" x 12".
"Flat Mounting Bracket"
No. 1073 Bracket MountMounting bracket permits mounting on a flat deck surface or on the side of a gunnel or transom. The mounting design gives 360 rotation.
Flat Clamp - Stainless steel surface / Malibu mounting bracket
"Vertical Mounting Bracket"
Side Mount BracketPermits small Rule bilge pumps to be side mounted to a vertical stringer, a bulkhead or a transom. Use this bracket when bottom mounting is inconvenient or impossible. Simply remove the strainer from the pump, put the bracket in place, and reassemble.For flow rates 500 - 1100 gph
Available for the A3, A6 and A12, the new Amphibian Mounting Bracket can be screw fixed or zip tied to any surface for secure mounting. With the use of the clamp assembly you can affix your Amphibians to any round pipe, conduit or T-Top. And with the foot, you can have the ultimate in flexibility with movement in a vertical position.Supplied with marine grade 316 Stainless Steel bolts and nylox nuts, this injection moulded ABS bracket will afford you the ultimate in longevity and perfomance.
Cord retention brackets and vertical-mount bracket kits to complete rack power distribution solutions. Main Features Manufacturer: American Power Conversion Corp, Manufacturer Part Number: AP7400, Manufacturer Website Address: www.apc.com, Product Type: Bracket, Dimensions: 0.25" Height x 2.5" Width x 2.63" Depth - Maximum, Weight: 0.25 lb - Net, Standard Warranty: 2 Year(s)
