Home
> Attwood Automatic Float Switch
|
|
 |
 |
 |  |
| The Automatic Float Switch converts any bilge pump that draws 12 amps (at 12 VDC) or 6 amps (at 24 VDC) or less to fully automatic operation. It features a compact, low-profile design that mounts on any surface from horizontal up to a 24° angle. No large voltage drop which reduces bilge pump output like some reed switch designs. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume ignition and electrical shock. Contains no harmful mercury. Float switch installs independently or directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation. Actuates pump motor at 2 water level Dimensions: 3 high x 3- 1/4 wide x 4- 3/4 long Rated voltage: 12 and 24 volt Exclusive Online Only products are products with a catalog number beginning with the letters MP or EP. Example: MP0021. We are committed to shipping your order as quickly as possible. In the event that you wish to cancel this order, the cancellation must take place within 2 hours from the time the order was placed. We are unable to cancel your order after this time period because your order is already in the fulfillment process. Online Only products require a Return Merchandise Authorization (RMA) from BoatersWorld.com customer service department. Click Here for Complete Return and Exchange Policies for Exclusive Online Products |
Attwood Automatic Float Switch Reviews
Related Products
