|These heaters use hot water from your engine's water circulation system to supply heat to remote locations in your boat.|
The entire line is finished with a powder-coated exterior and the fan motors are available in 12V and 24V DC. Optional Hot Tubes mount in bulkheads or under seats and look like regular vents, but include an extra 6 ft. section of hose which can be pulled out, directed where you need the heat, and then stowed back in the tube when not in use.
- Dimensions: 6.4" H x 9.4" W x 9.35" D
- 28,000 BTU
- Hose barb - 5/8" (3/4" by special order)
- Amp draw: 8.5A - 4.4A
- Air flow: 263cfm - 172cfm
- Kits include Euro-style black or white vent(s) (except for Hot Tube)
- Basic kit includes: 4-position rotary switch, wire harness, 6 ft. vent hose per vent (12 ft. for Hot Tube), & all necessary mounting brackets and screws.
- Complete kit includes: everything in the basic kit as well as 25 ft. of 5/8" heater hose and brass pipe fittings kit.
- 2 year warranty
Exclusive Online Only products are products with a catalog number beginning with the letters MP or EP. Example: MP0021. We are committed to shipping your order as quickly as possible. In the event that you wish to cancel this order, the cancellation must take place within 2 hours from the time the order was placed. We are unable to cancel your order after this time period because your order is already in the fulfillment process. Online Only products require a Return Merchandise Authorization (RMA) from BoatersWorld.com customer service department. Click Here for Complete Return and Exchange Policies for Exclusive Online Products