Home
>
Rule Rule-Mate® 1500 G.P.H. Automatic Bilge Pump
 |
 |
 |
| Rule-Mate® 1500 High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted. Fully Automated Bilge Pump Rule introduces the rule-mate™ series of bilge pumps. The rule-mate consists of a powerful rule bilge pump and a new non-mecury float switch in a single housing. While fully automated, the pump will only turn on when the water level rises. There is no cycling and battery drain. The pump remains off until the internal float switch rises. The pump then stays on until the water is evacuated. The pump's internal computer senses no load (Water) against the impeller and then shuts off. A detachable strainer provides easy access to the impeller area for removal of debris. Each pump is easily installed with the pump and switch internally wired. A third wire allows the pump to be connected to a manual override switch if so desired. The rule-mate bigle pump is thoughtfully designed, and due to its compact profile, can be used in practically all bilge pumping applications. Exclusive Online Only products are products with a catalog number beginning with the letters MP or EP. Example: MP0021. We are committed to shipping your order as quickly as possible. In the event that you wish to cancel this order, the cancellation must take place within 2 hours from the time the order was placed. We are unable to cancel your order after this time period because your order is already in the fulfillment process. Online Only products require a Return Merchandise Authorization (RMA) from BoatersWorld.com customer service department. Click Here for Complete Return and Exchange Policies for Exclusive Online Products | Our Experts recommend these accessories:
| ||||||||||
