Nikon SB-R200 Wireless Speedlight

The SB-R200 is easily attached to the front of the lens via the supplied SX-1 Attachment Ring, which accommodates up to four units for shadowless, full - surround illumination of small objects. Alternatively, SB-R200 Speedlights can be mounted on the supplied AS-20 Speedlight Stands and freely positioned for desired lighting effects. When the SX-1 is detached from the lens, up to eight SB-R200s can be mounted on the ring, creating a powerful and controllable wireless mono-light.

Expandable System multiplies your lighting Solutions Whichever configuration you choose, you can always. Expand your lighting options with additional SB-R200 Wireless Remote Speedlights. Additional SB-R200s give you greater flexibility in your flash setup.

• Compact and lightweight remote Speedlight Unit
• Supports the Nikon Creative Lighting System (CLS) and compatible CLS cameras
• Easy-to-set analog controls
• Built-in target light and AF Illuminator allows for proper position of Speedlight on the subject as well as autofocus operation in low light situations
• i-TTL Flash control for accurate flash exposures in close-up and other multiple lighting applications
• Can be set to one of three Speedlight Groups (A,B and C)
• Offers four independent channels for competitive shooting environments
• Integrates perfectly into multiple flash situations including the SB800 and SB-600 Speedlight units

• Electronic construction: Wireless remote flash unit with Automatic Insulated Gate Bipolar Transistor (IGBT) and series circuitry
• Angle of coverage: 78 degrees horizontal, 60 degrees vertical
• Guide number: 10/33 (ISO 100, m/ft.), 14/46 (ISO 200, m/ft.)
• Flash modes: i-TTL, D-TTL, TTL (film-based cameras), M (manual)
• Recycling time: 6 seconds or less
• Bounce capability: Flash head tilts down (toward optical axis) to 60 degrees with stops at every 15 degrees, and up (away from optical axis) to 45 degrees with stops at every 15 degrees
• Number of flashes: Approximately 290
• Flash duration: Approximately 600 micro-seconds
• Mounting foot: Dedicated shoe for SX-1 Attachment Ring or AS-20 Speedlight Stand
• Power source: One 3V CR123A lithium battery
• Dimensions (W x H x D): Approximately 3.1 x 3.0 x 2.2 in. (80 x 75x 55 mm)