- Led Light Battery
- Small Mount Bracket
- Kit Mounting Bracket
- Stainless Mounting Bracket
- Led Light Switch
- Led Light Lens
- Led Motion Sensor
- Bright Light Led Battery
- Wesbar Light Kit
- Heavy Duty Steel Bracket
- Windline Stainless Steel Anchor Bracket Rail Mount
- Ice Chests Coolers
- Scotty Right Angle Side Mounting Bracket
- Afi International Shorty Horn Volt
- Scotty Portable Bracket For Model
- Coleman Cooler Light
- Sea Dog Transom Mount Fixed Motor Bracket
- Afi Compact Single Horn With Black Cover
- Ogm Led Stern Light W Mounting Bracket
Led Light Bracket
OGM Corporation LED Running Lights - LED STERN LIGHT W/ MOUNTING BRACKET
Lumitec's recently designed Cockpit Flood Light offers the same great light output as it predecessors with a stylish new appearance. Utilizing Lumitec's proprietary light engine technology, it is a perfect replacement for 55W Halogens. The luminaire's small size (70% smaller than comparable lights) and low power (80% less current draw than a 55W Halogen) have made it an ideal selection for many exterior locations. Completely sealed and IP 67 compliant, expected output life is more than 22,000 hours. Powder coated die cast aluminum housing is salt-spray tested to 3,000 hrs. 10 to 30VDC, draws 900mA @ 12VDC.
Battery Navigation Light Requires 4 AA batteries (not included), Molded one piece body construction, Shock resistant neoprene accents, Incandescent or LED available, Rated at 100,000 hours LED service life, LED uses 90% less energy than incandescent, Sealed heavy duty On/Off switch, Insert molded brass threaded mounting bushings, Removable lamp carriage assembly, 6.18" x 2.53"
LED Spreader LightTACO's Marine LED Spreader Light will light up decks with six high-powered 1-watt LEDs providing a 150-degree-wide spread with 675 lumens output of bright white light, equivalent to a 50W halogen. Highly efficient, these low draw (Features: Six high-powered 1 watt LEDs High 675 Lumens light output Wide 150 degree light spread Waterproof (non-submersion) UV- & impact-resistant white housing & polycarbonate lens
Auto-on LED Cooler Light5 bright white LEDs automatically illuminate the inside of the cooler while the lid is opened - the true convenience of a fridge gone portable.Features: Automatically shuts off after 10 seconds of no motion detection, maximizing battery life, Waterproof to a depth of 1 meter - place it in teh bottom of the cooler and cover with ice for instant party lighting, Easily mounts to any hard plastic cooler using the option of an adhesive strip or self-tapping screws (included), Remove the light without having to remove the mounting bracket for easy cleaning or protected storage
Waterproof LED 4x6 Low Profile Trailer Light KitKit comes complete with two low profile tail lights, 25' trailer wiring harness cable with molded 4-way plug, 4' car wiring harness cable with molded 4-way plug and license plate bracket
Submersible LED Under 80" Combination Trailer Light KitComplete kit with two tail lights, 25' trailer wiring harness cable with molded 4-way flat prong plug, 4' car harness cable with molded 4-way flat prong plug and license plate bracket.
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8 - 16 volts Hard-wire with separate lead and ground wires for mounting to all surfaces Mounts on 1- 15/16 centers or with optional mounting bracket on 1-18 centers 10,000 hour rated life 2- 3/4 W x 3/4 W x 1 D
I2Systems V-Line Latitude HB - Linear LED Light Fixture - V-LINE LATITUDE ADJ ANGLE MTG BRKT
Capri Flush Mount Flood LightThe Flush Mount LED Cockpit Flood Light is a follow up to Lumitec's highly successful bracket mount LED flood light. Utilizing Lumitec's proprietary light engine technology, it is a perfect replacement for 55W Halogens. The luminaire's small size (70% smaller than comparable lights) and low power (80% less current draw than a 55W Halogen) have made it a favorite among top-tier boat builders. Completely sealed and IP 67 compliant, expected output life is more than 22,000 hours. Its powder coated die cast aluminum housing is salt-spray tested to 3,000 hrs. 10 to 30VDC, draws 900mA @ 12V.Voltage: 10 to 30VDC Current: 900mA @ 12VDC, 450mA @ 24VDC
The V941 Submersible LED rear lighting kit for trailers under 80 wide includes a pair of 840/840L LED tail lights plus license bracket, mounting hardware and installation instructions. Front side marker lights and side reflectors are necessary, in addition, to meet DOT requirements.
Waterproof LED Over 80" 3x8 Low Profile Trailer Light KitKit comes complete with two low profile tail lights, 25' trailer wiring harness cable with molded 4-way plug, 4' four wire car wiring harness cable with molded 4-way plug and license plate bracket
LED Spot LightPart #: F38-5520WHA-1Light up the waers ahead with 1,000,000 candlepower LED Spot light. Durable and impervious to saltwater, fresh water and pouding wakes. Long-lasting 100,000 hours of operation that won't drain batteries.Features: Three high-powered 3-Watt LEDs High (4,474 Lumens) output 22 degree vertical/25 degree horizontal light spread UV- & impact-resistant white housing & polycarbonate lens Waterproof (non-submersion) Adjustable clamp model fits standard 3/4" - 1" IPS T-Top ring
The 3D LED Wireless Motion Sensor Flood-Lite uses new LED technology to provide safe bright light anywhere you need it without connecting any wires. It uses 3 D cell Alkaline batteries (not included) and will run for more than 1 year without changing batteries (based on average use). The Wireless LED Flood-Lite uses a sophisticated motion sensor coupled with a photo sensor and variable timer and brightness control. The Flood-Lite will only turn on when it is dark and only when motion is detected. The light automatically turns itself off after 30 seconds or 2 minutes. The LED Flood-Lite features 2 brightness levels to allow for extended, ensure long life, and energy efficiency. The LED Flood-Lite comes complete with a 4 way swivel mounting bracket and hardware for easy installation. The 3D Wireless Motion Sensor LED Flood-Lite is a perfect light for any garage, patio, yard building, barn, or walkway. ...
The 3C Wireless Motion Sensor LED Stair-Lite uses new LED technology to provide safe bright light anywhere you need it without connecting any wires. The light uses 3 C cell Alkaline batteries (not included) and will run for more than 1 year without changing batteries (based on average use). The Wireless LED Stair-Lite uses a sophisticated motion sensor coupled with a photo sensor and variable timer and brightness control. The LED Stair-Lite will only turn on when it is dark and only when motion is detected. The light turns itself off automatically after 30 seconds or 2 minutes. These features ensure long life, and energy efficiency for this light. The 3C Wireless Motion Sensor LED Stair-Lite comes complete with mounting bracket and hardware for easy installation.
Wireless Motion Ceiling Light - White 41-1073 The LED Wireless Motion Sensor Lights use new LED technology to provide a safe bright light anywhere you need it without connecting any wires. These wireless lights use a sophisticated motion sensor coupled with a photo sensor, allowing for activation only when it is dark and only when motion is detected. The lights automatically turn themselves off. The LED Wireless Motion Sensor Lights come complete with mounting bracket and hardware for easy installation. With a 180 motion sensor and lighting up 350 square feet this light is a must for any dark area. Product Specifications Lumens:
The V947 Submersible Rear Lighting Kit for all trailers 80 wide and over includes a pair of low profile 856856L LED tail lights plus license bracket, mounting hardware, and installation instructions. Provides rear lighting and reflectors. Front side markerclearance lights, side reflectors, and rear identification lights are necessary to meet all DOT requirements.
"Aluminum Mounting Bracket"
No. 1021Portable mounting option that's great for aluminum boats. Double stainless steel bolts and black anodized aluminum. 2" clamp opening. Includes stainless steel bolts to fasten mounting bracket.Dimensions: 5 5/8" x 4 3/4" x 3 1/8"
Clamp-On AccessoryFits: 1.050" PipeMounts: Horizontal/VerticalFinish: SilverHeavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit.
Designed to attach directly to a vertical transom. Made of strong, lightweight marine grade aluminum, powder coated in white for maximum corrosion resistance. Reinforced polypropylene mounting board is 1- 1/2 thick with all stainless steel fasteners. Does not include mounting fasteners. Note: The use of a safety chain is recommended on all motor brackets.
"Small Mount Bracket"
Side Mount BracketPermits small Rule bilge pumps to be side mounted to a vertical stringer, a bulkhead or a transom. Use this bracket when bottom mounting is inconvenient or impossible. Simply remove the strainer from the pump, put the bracket in place, and reassemble.For flow rates 500 - 1100 gph
Designed to hold small outboards up to 8 hp 2-stroke upright on the stern rail. These Sea-Dog motor brackets will fit both 7/8 and 1 rails as well as rails using 90 tee fittings.
Designed to hold small outboards up to 8 hp 2-stroke upright on the stern rail. These Sea-Dog motor brackets will fit both 7/8 and 1 rails as well as rails using 90 tee fittings.
"Steel Mounting Bracket"
M1 Mounting Bracket, you can mount the antenna with any standard stainlessantenna mount available from your local marine equipment supplier! Use this bracket with a standard threaded steel mount (1"-14 threads) to make the TracVision M1 a drop-in replacement for a Shakespeare SeaWatch or Glomex off-air antenna. Just thread the mounting nut and mounting bracket onto the antenna mount, then screw the antenna to the mounting bracket - that's all there is to it!
No. 1015For boats with narrow or uneven gunnels. Fits downriggers 1060 and 1050. Includes stainless steel bolts to fasten mounting bracket (No. 1010 downrigger mounting bracket not included)Dimensions: 5 1/4" x 2 1/2"Bolting Dimension: 4 9/16" x 1 5/8"(No. 1010 not included)
This marine grade floodlight has a solid glass lens, a stainless steel mounting bracket and a 55 watt halogen bulb.
"Stainless Mounting Bracket"
Bracket only for: Mounting on 1 rail tubing Mounting on horizontal deck surfaces Mounting on the forward side of a mast
This marine grade floodlight has a solid glass lens, a stainless steel mounting bracket and a 55 watt halogen bulb.
With their stainless steel housing, the Series 50 is Aqua Signal's premium series. These lights combine striking appearance with exceptional quality and durability. They are designed for all vessels less than 65.6 feet (20 meters) in length. On Series 50 lights the wires exit from the bottom of the fixture. Bulb changing is easy and requires no tools. Simply loosen the knurled collar on the bottom of the fixture, and the socket and bulb drop out the bottom. Minimum visibility is 2 nm and 3 nm for masthead lights; waterproof to IP56 standards (withstands power water jetting). Elegant stainless steel, saltwater resistant, non-magnetic housing Acrylic Fresnel lens provides proper beam distribution Mounting: a variety of mounting brackets are available Bulb: special vertical tungsten filament with BAY 15d bayonet socket Clearwhite lights (except masthead) use: 10 watt bulb Masthead colored lights use: 25 watt bulb Sold with 12 volt bulb included; ...
