Large Mount Holder
Flush Mount Rod HolderRH-532VS Large 0 Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
Flush Mount Rod HolderRH-534HS Large 15 Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
FLUSH MOUNTStainless Steel Rod HoldersMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8".ANGLE:15LENGTH:9"I.D.:1-5/8" Tough enough for heavy tackle
FLUSH MOUNTStainless Steel Rod HoldersMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8".ANGLE:0LENGTH:9"I.D.:1-5/8" Tough enough for heavy tackle
FLUSH MOUNTStainless Steel Rod HoldersMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8".ANGLE:30LENGTH:9"I.D.:1-5/8" Tough enough for heavy tackle
The RAM Composite Universal Finger Grip? Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. This mount is designed to hold the following devices:Cell Phones2-Way RadiosGPS DevicesHeight Dimensions:Minimum with Top and Bottom Plates: 5.25"Maximum with Top and Bottom Plates: 6.0"The top and bottom plates can be removed for larger devices.Spine Plate Dimensions: 2.5W x 5.0H"Using Short Arm Side Clamps:Maximum Depth: 0.75"Minimum Width: 1.25"Maximum Width: 3.0"Using Medium Arm Side Clamps:Maximum Depth: 1.25"Minimum Width: 1.5"Maximum Width: 3.5"Using Long Arm Side Clamps:Maximum Depth: 1.6"Minimum Width: 2.25"Maximum Width: 3.5" Material:High Strength CompositeNote:The "U" in ...
Cup-iT Portable Golf Cart GPS MountQuick and easy cup holder mounting kit secures most Golf GPSThe Cup-iT?s sturdy flex shaft and 360 rotating capability adds more adjustability for easier viewing and access with a secure base. Also included is the Grip-iT Mobile Device Holder that works with almost any portable device.Features: Fits large cup holder sizes up to 3.75" in diameter, Transfers to multiple vehicles, Grip-iT adjusts out to 4.5" wide, Fits most portable devices, No tools required for installation
Flush Mount 30 Degree Rod HolderMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8".Features: Tough enough for heavy tackle, 30 degree angle, 9" length, 1-5/8" diameter
This 4-cup holder also includes a SeaSucker's Large Dry Box, which fits snugly into a slot in between the cup holders, giving you waterproof storage for several people's wallets, cell phones, keys, cameras, etc. Attaches to horizontal surfaces like your console top or a table top and held in place by one 4 1/2" SeaSucker vacuum mount. Box size: 7.5"x3.5"x3.5" (approx). Approx. overall dimensions: 19" x 10".
Flush Mount Rod HolderHeavy Duty Bar PinAll Stainless SteelRH-534HS/XS Large 15The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
Flush Mount Rod HolderHeavy Duty Bar PinAll Stainless SteelRH-532VS/XS Large 0The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
Made of 100% 316 stainless steel, featuring an extra large, low profile cap and a super tough stainless steel gimbal bar welded in place designed to take the punishment of downriggers or heavy tackle. White Vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. Highly polished Silver finish, with a heavy-duty 100% welded tube-to-cap joint which will not break out.
Made of 100% 316 stainless steel, featuring an extra large, low profile cap and a super tough stainless steel gimbal bar welded in place designed to take the punishment of downriggers or heavy tackle. White Vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. Highly polished Silver finish, with a heavy-duty 100% welded tube-to-cap joint which will not break out.
Made of 100% 316 stainless steel, featuring an extra large, low profile cap and a super tough stainless steel gimbal bar welded in place designed to take the punishment of downriggers or heavy tackle. White Vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. Highly polished Silver finish, with a heavy-duty 100% welded tube-to-cap joint which will not break out.
Fits Scotty post rod holder mounts for convenient mounting and versatile positioning. Tough reinforced nylon and rigid design gives Trap-Ease ultimate strength. Long arm for extended reach over gunnel Large size roller with pivoting head makes for smooth operation Recommended for non-commercial, single trap use
"Car Phone Mount Holder"
The RAM universal cradle for smartphones and cell phones with skins, bumpers or covers is spring-loaded to provide ultimate security and support for your smartphone, plus the RAM arm lets you aim it where you can see it. Don?t forget that it comes with a 4 1/2? SeaSucker so that you can mount it just about anywhere, whether on your boat, in your car, or anywhere. Compatible with the following phones: Apple iPhone 3G, iPhone 3G S & iPhone 4, Blackberry Bold & Storm 2, HTC Droid Incredible, Evo 4G & G2, Motorola Droid Pro, Droid 2 & Droid X, Nokia N8, N900 & X6, Samsung Galaxy S & Wave, and Windows Phone 7. Height range: 4.75" to 6.25"; width range: 2.25" to 3.25".
This cup holder is the same as SeaSucker?s best-selling 2-Cup Holder - Vertical Mount, but with a slick little adapter that lets them attach the SeaSucker on the bottom so you can mount it on a horizontal surface like a console or table top.A Its standard 3 1/2" cup inserts are big enough to hold cans or bottles in foam koozies, or you can swap out one of the cup holder inserts for one of SeaSucker?s Small Dry Boxes (small waterproof storage boxes for your wallet, cell phone, PDA, etc.).AMounts with a 4 1/2" SeaSucker. Do you have a fiberglass hot tub? These will attach to the horizontal edge, so no more lounging in beer-infused hot water. The adapter can be removed if you want to convert it into a vertical mount cup holder - you'll just need a Phillips screwdriver. Approx. 12" x 5". SeaSucker's low-profile 2-Cup Holders attach ...
This cup holder is the same as SeaSucker's best-selling 2-Cup Holder - Vertical Mount, but with a slick little adapter that lets them attach the SeaSucker on the bottom so you can mount it on a horizontal surface like a console or table top.A Its standard 3 1/2" cup inserts are big enough to hold cans or bottles in foam koozies, or you can swap out one of the cup holder inserts for one of SeaSucker?s Small Dry Boxes (small waterproof storage boxes for your wallet, cell phone, PDA, etc.).AMounts with a 4 1/2" SeaSucker. Do you have a fiberglass hot tub? These will attach to the horizontal edge, so no more lounging in beer-infused hot water. The adapter can be removed if you want to convert it into a vertical mount cup holder - you'll just need a Phillips screwdriver. Approx. 12" x 5". SeaSucker's low-profile 2-Cup Holders attach ...
"Iphone Mount Holder"
RAM Holder Cradle for Apple iPhone 4Material: High Strength CompositeBall Size: 1" Rubber ball "B" SizeThe cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. Will not hold the Apple iPhone (1st Generation), iPhone 3G or iPhone 3G S.Lil' Buddy MountMinimalists in design yet incredibly useful is the RAM Lil' Buddy mount. Using an adhesive disk, put the Lil' Buddy practically anywhere you want to keep your portable electronics easy to see and always within your reach. Designed with a very small foot print, finding a home on your dash or console is easy. Deciding what you want to mount may be a tough decision though. With so many uses, your iPhone, Blackberry, Palm, or MP3 player can be perfectly matched and supported by your new best friend, the RAM Lil' Buddy. The Lil' Buddy attaches directly to any ...
RAM-A-CAN IIUniversal Cup Holder Mount w/ 6" Flex ArmAt RAM, "mount anything anywhere" means just that. We pride ourselves on utilizing the most convenient of spaces and our latest cup holder mounting platform puts your favorite pocket size device as close as your morning coffee. Easy to reach, easy to use, and no drilling, gluing, or sticking required, just plug and go. This simple and attractive design affords a 6" flex mounting feature. Perfect for supporting an iPhone, GPS, Cell Phone, PDA, or iPod just to name a few, you'll have no trouble finding great new ways to use this product. A durable composite shell construction and soft fins that can be trimmed to fit makes our cup holder mount one of the most portable and versatile "Go Anywhere" products offered. Material:High Strength Composite
RAM Suction Cup, Twist Lock Mount w/Cradle for Garmin dezl GPSRAM Cradle Holder for the Garmin dezl 560LMT & 560LT:This RAM high strength composite cradle is designed to hold the following devices: Features:Material:High Strength Composite Note:The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system. Suction Cup, Twist Lock Mount:The RAM-B-166U, twist lock suction cup mount consists of a 3.25" suction cup locking base and diamond plate end. The mount is designed with a RAM 1" diameter rubber ball and socket system that has adjustment point at the cradle plate and base. Simply attach the suction cup base to ...
"Vent Mount Holder"
Mobile Grip-iT Device Holder with Rotating Vent Mount
Mobile Hold-iT Universal Mobile Device HolderThe Mobile Hold-iT, is a universal holder designed for all portable electronics. It's unique "Slide-On Fastening System" allows you to mount virtually any mobile device in a sleek, professional way while providing a stable, secure and easily accessible mounting solution. Using 3M VHB Tape, it can be mounted just about anywhere and installs in seconds. The included Standard Vent Mount also offers the additional option of mounting it to one of the air vent louvers when used in conjunction with the also included T-Notch Adapter. Infinite Dash Mounting Options, Installs in Seconds, Hold-iT Attaches to Your Mobile, Device Using 3M VHB Tape, Standard Vent Mount Included
The Grip-iT Device HolderThe PH-Grip-iT universal holder is designed for portable mobile electronics. The included Rotating Air Vent Mount makes for easy mounting to the louvers of your vehicles air vent to provide a stable, secure, and easily accessible mounting solution for your portable device. Compatible with all models of *Apple iPods, including the iPod mini, Mobile phones, Satellite Radios, PDA's, Portable Mp3 Players and Handheld GPS units.*Not compatible with iPod Nano., Provides a secure mounting option with easy installation., Adjustable Arms open to 4.5" wide to accommodate wide range of mobile devices. Arms also adjust to allow easy reach of device button controls., Mounts to air conditioning/heating vent in your vehicle and keeps your device secure., Made of durable ABS plastic that holds up to wear and tear.
"Mobile Mount Holder"
Drink Cup Mount Description:A favorite world wide, the RAM self leveling drink cup holder will bring a smile to anyone's face when they get it. The perfect accessory for any vehicle including motorcycles, ATV's, Big Rigs, and yes, even your prized riding lawn mower. Easily installed and positions to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. Take a corner as hard as you like, this holder is ready to ride.Motorcycle Handlebar Mount Description:The u-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device. Included in this ...
Turn your cumbersome windshield mounted GPS into a convenient dashboard mount.The most convenient mounting accessory for your portable GPS. The Nav-Mat combines the physics of weight distribution along with a high-tech, anti-skid material to provide a solid mounting base for your window-mounted device. Nav-Mat contours to the top of your vehicles dashboard so it works on any uneven or textured surface-and the anti-skid base keeps your device from sliding.Uses the windshield mount sold with popular GPS models Easily view your GPS while driving, Weighted anti-skid base, Contours to your dash on uneven and textured surfaces, Portable and easy to stow to keep out of view, Holds up to seven poundsGreat for iPods, cell phones, satellite radios and other electronic devices when used with a Bracketron Universal Mobile Grip-iT Window Mount and Device Holder.
GPS Pro-MountThe GPS Pro Mount is a heavy duty window mount that provides a stable, secure and easily accessible mounting solution for your portable devices.Adjustable in both height and angle, and featuring the "Quick Lock & Release Lever", the GPS Pro Mount easily installs onto the vehicles windshield. Featuring a 360-degree rotating head for further tweaking of the viewing angle, the GPS Pro Mount is the ideal solution for mounting any mobile electronic devices in your vehicle.The included Grip-iT Universal Holder features a unique design which allows its clamping arms to open up to 4.5" wide, accommodating most portable electronic devices on the market today. The arms also adjust up or down, allowing you to configure it to your particular device while allowing access to all buttons and functions. Further customization can be achieved by pivoting the bottom feet in or out for additional support. Height & Angle Adjustable, 360 ...
