- Flexible Universal Mount
- Adjustable Arm Mount
- Universal Vehicle Mount
- Ram Universal Mount
- Quick Release Mount
- Locking Aluminum Mount
- Cell Mount Holder
- Large Mount Holder
- Ram Mount Holder
- Ram Mount Rubber Holder
- Afi Adjustable Arm Black S.s
- Minn Kota Trolling Motor
- Premier Mounts Pbc Universal Projector Ceiling
- Ram Mount Locking Apple Ipad Flat Surface
- Ram Mount Marine Electronics Universal Mountgimbal Bracket
- Ram Mount No Drill Vehicle System
- Windex Av Antenna Mounted Wind Vane
- Ram Mount Marnie Electronics Long D 111u
- Windshield Wiper Motor
Flexible Arm Mount
The LA Series is ergonomically designed to work with multiple moving points for use with most installations while providing flexible movement.With many installations having the need for the product to be in two or more places, the LA Series is fully adaptable for multiple locations. With the use of the LA-10C you can fix the plates to the wall and then simply slide the LA-55-3 on or off to move to any location, or even mount the TV directly to the wall plate.These brackets have been designed to be used in moving or stationary situations, with or without the TV being attached. Weight capacity: 12 kg (26.4 lbs), Tilt: 180 degrees up and down, Rotation: 270 for portrait or landscape viewing, Material: High quality aluminum alloy, Mounting Option: 180 degrees, 270 degrees (wall, display), Pivot: 180 degrees, 270 degrees, 270 degrees (wall, arm, display), Extension: 191.5 mm, Display Compatibility: VESA ...
The RAM Composite Universal Finger Grip? Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. This mount is designed to hold the following devices:Cell Phones2-Way RadiosGPS DevicesHeight Dimensions:Minimum with Top and Bottom Plates: 5.25"Maximum with Top and Bottom Plates: 6.0"The top and bottom plates can be removed for larger devices.Spine Plate Dimensions: 2.5W x 5.0H"Using Short Arm Side Clamps:Maximum Depth: 0.75"Minimum Width: 1.25"Maximum Width: 3.0"Using Medium Arm Side Clamps:Maximum Depth: 1.25"Minimum Width: 1.5"Maximum Width: 3.5"Using Long Arm Side Clamps:Maximum Depth: 1.6"Minimum Width: 2.25"Maximum Width: 3.5" Material:High Strength CompositeNote:The "U" in ...
Universal Vehicle Laptop MountPart #: LTM-MS-525Product DescriptionThe Universal Vehicle Laptop Mount is a heavy duty in-vehicle computer laptop mount for the computer user on the go.Designed for the professional road warrior that needs a sturdy and flexible mounting system for their laptop computer.Our Bracketron laptop mount is made from heavy duty 30mm aluminum tubing and high strength alloy locking joints creating a solid and rugged mount for your laptop.The Bracketron system secures to the passengers side seat bolt utilizing a quick release fitting. The mount can be remove easily in seconds or just folded and locked in place on the floor, out of the way, and ready for use the next time it's needed.The quick release telescoping lower arm provides easy adjustment for height and position and also allows the deck to swing out of the way when not in use.Adjusting the computer angle is controlled easily with the professional ...
"Tilt Swivel Mount"
Quick Release MountCompatible with echo 100, 150 and 300c, this replacement mount features quick release capabilities and tilt/swivel for optimum viewing.
Compatible with echo 200, 500c and 550c, this replacement mount features tilt/swivel capabilities for optimum viewing. With the mount's quick cable disconnect feature, you can plug the necessary cords directly into the mount, allowing you to seat/unseat your device with ease.
Marine Mount For 78 SeriesAttach our marine mount to your helm, then swivel or tilt for optimal viewing. An easy locking mechanism keeps your compatible device secure while you're underway, then releases to remove the device.
"Flat Arm Mount"
It takes flat panel off the desktop and attaches it from the cubicle wall. Height, reach, and tilt all adjust for viewing comfort. Main Features Manufacturer: Kensington Computer Products Group, Manufacturer Part Number: 60059, Manufacturer Website Address: www.kensington.com, Package Type: Retail, Product Type: Wall-mountable, Standard Warranty: 2 Year(s)
RAM Flat Surface Locking Mount with Locking Cradle for the Apple iPad & iPad 2 The RAM-B-138-AP8LU consists of (2 quantity) 2.5" diameter round bases with the universal AMPS hole pattern, locking double socket arm and locking cradle for the Apple iPad & iPad 2. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the iPad flat surface mount to your optimum viewing position. Locking Cradle Features:Material:High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note:The "U" in the part number reflects product packaged in poly bag. The RAM-B-138-AP8LU will NOT hold Apple iPad's in cases/sleeves/bumpers. RAM recommends the RAM-B-138-TAB3U for iPad's in cases/sleeves/bumpers.Some manufacturers, including but not limited to: APC, IBM, HP, Sony, Panasonic, Samsung, JVC, Philips, and Microsoft ...
The RAM-B-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 1" rubber ball and flat 6.25" x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles. For most applications, mount will support up to ten pounds. Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag. For mounting a GPS puck antenna to this mount, RAM recommends the RAM-338U
"Steel Arm Mount"
This is a complete kit including motor, arm and blade, designed for interior mounting locations. It comes in a choice of sweep angles, and windshield frame or deck mounting options. 12 volt, single speed motor; max. current draw is 2 amps Corrosion-resistant aluminum alloy case with black crackle finish Adjustable right or left self-parking Windshield frame mount ( 3/8 x 2- 1/2 shaft) or deck mount ( 1/2 x 3- 1/2 shaft) Includes stainless steel arm adjustable from 6- 3/4 to 10- 1/2 (AFI 33006AS) Includes deluxe 11 SS, multi-support, curved blade (AFI 33004) Deck Mount version includes deck mount adapter kit (AFI 33000)
Industrial strength suction cup for your quick-release HERO camera. This is the suction cup mount that comes with the Motorsports HERO and Motorsports HERO Wide cameras. Strong enough to pull dents out of a car door (unfortunately tested and proven by GoPro) or stay attached to an airplane at 200mph+, proven though not endorsed by GoPro per FAA rules. Perfect if you own a Helmet HERO, Surf HERO, or Wide HERO camera and want to add a suction cup mount to your arsenal. Attaches to cars, motorcycles, snowmobiles, cockpits, you name it. NOT RECOMMENDED for surfboards, snowboards or other high-impact sports. Only recommended for non-impact activities. What's Included: 1 Suction Cup Camera Mount, 1 Rotational Joiner Arm, Warranty: 1 Year
Roll bar tube clamp for mounting your quick-release GoPro camera on to tubes & frames ranging from 1.4" to 2.5" (3.5cm - 6.35cm) in diameter. Perfect for clamping your camera to the radiator cap (both metal and plastic caps) on karts. You can also clamp to bike frames, bumper bars, ski/surfboard racks, or anything else that is in the size range above. Comes with pivoting orientation arms allowing for 3-way adjustability, ensuring you can get the angle you want. Compatible with all GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE HERO cameras. Not compatible with the Digital HERO 5 Wrist Camera. What's Included: 1 Roll Bar/Tube Clamp, 1 Three-way Adjustable Pivot Arm (three piece assembly), Warranty: One Year
"Double Arm Mount"
The RAM-B-201U powder coated marine grade aluminum 6.88" double socket arm allow for connnection to a 2.25" diameter ball. Socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions:Overall Length: 8.375"Socket-To-Socket Length: 6.5625" Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball "D" Size
RAM Short Double Socket Arm for 1.5" Ball BasesThe RAM-201U-B, SHORT double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions:Overall Length: 3.5"Socket-To-Socket Length: 2.25"Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size
RAM Long Double Socket Arm for 1.5" Ball BasesThe RAM-201U-D, LONG double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 9.125"Socket-To-Socket Length: 8.75" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size
"Adjustable Arm Mount"
Trap-ease750Includes No. 241 side / deck mountCrab and prawn trap roller for easy retrieval. Fits Scotty post rod holder mounts for convenient mounting and versatile positioning. Touch reinforced nylon and rigid design gives the Trap-ease ultimate strength Larger size roller with pivoting head makes for smooth operation, For use with rope up to 1/2" diameter, Long arm for extended reach over gunnel, Adjustable arm angle
This is a complete kit including motor, arm and blade, designed for interior mounting locations. It comes in a choice of sweep angles, and windshield frame or deck mounting options. 12 volt, single speed motor; max. current draw is 2 amps Corrosion-resistant aluminum alloy case with black crackle finish Adjustable right or left self-parking Windshield frame mount ( 3/8 x 2- 1/2 shaft) or deck mount ( 1/2 x 3- 1/2 shaft) Includes stainless steel arm adjustable from 6- 3/4 to 10- 1/2 (AFI 33006AS) Includes deluxe 11 SS, multi-support, curved blade (AFI 33004) Deck Mount version includes deck mount adapter kit (AFI 33000)
