Flat Arm Mount
It takes flat panel off the desktop and attaches it from the cubicle wall. Height, reach, and tilt all adjust for viewing comfort. Main Features Manufacturer: Kensington Computer Products Group, Manufacturer Part Number: 60059, Manufacturer Website Address: www.kensington.com, Package Type: Retail, Product Type: Wall-mountable, Standard Warranty: 2 Year(s)
RAM Flat Surface Locking Mount with Locking Cradle for the Apple iPad & iPad 2 The RAM-B-138-AP8LU consists of (2 quantity) 2.5" diameter round bases with the universal AMPS hole pattern, locking double socket arm and locking cradle for the Apple iPad & iPad 2. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the iPad flat surface mount to your optimum viewing position. Locking Cradle Features:Material:High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note:The "U" in the part number reflects product packaged in poly bag. The RAM-B-138-AP8LU will NOT hold Apple iPad's in cases/sleeves/bumpers. RAM recommends the RAM-B-138-TAB3U for iPad's in cases/sleeves/bumpers.Some manufacturers, including but not limited to: APC, IBM, HP, Sony, Panasonic, Samsung, JVC, Philips, and Microsoft ...
The RAM-D-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 2.25" rubber ball and flat 11" x 3" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and much more. Rubber ball and socket technology dampens shock and vibration, as well as allows for almost infinite adjustment and perfect viewing angles. Ball Size:2.25" Rubber "D" Ball Size Material: Powder Coated Marine Grade Aluminum
The RAM-B-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 1" rubber ball and flat 6.25" x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles. For most applications, mount will support up to ten pounds. Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag. For mounting a GPS puck antenna to this mount, RAM recommends the RAM-338U
Well thought out and compact designs are common place at RAM and our new RAM Tough-Tray II is no exception. Spring loaded to create just the right amount of holding force, most tablets, UMPC?s, and compact laptops can be made safe and secure while on the go. Simple to install and adjust retaining arms insure a perfect fit without interfering with ports or functions. Also, if a compact laptop is in place, these retaining arms hold firm with the screen up or down. Ideally suited to a multitude of applications, and easily attached to hundreds of mounting systems for cars, boats, planes, and more, compact devices just work better in the universal tablet holder from RAM.Dimensions:Tray Depth: 6.0"Tray Thickness: 1"Tray Width (Expansion): 8.56" to 12.31"Side Clamp Arm Height: 2.75" maxIncluded With Purchase:(1) Laptop Tray(4) Standard Retaining Arms(4) Flat Retaining Arms (Allow for laptops to close while in the tray)
RAM Seat-Mate Description:Compact, portable, amazingly strong and no tools required are words that best describe the new RAM Seat-Mate. Able to transform most any passenger seat into a workstation, simply unpack the mount from the compact bag, unfold the legs, and buckle it in. Truly innovative in design, this product is able to actively hold onto the seat and stabilize itself. For anyone who needs a temporary mobile workstation, this mounting solution is absolutely perfect. Designed to easily pack into a travel bag, suit case, or even under the seat of a vehicle, RAM makes it possible to create a comfortable workspace in minutes where ever your job takes you. The RAM Seat-Mate is perfect for laptops, tablets, and UMPCs. The integrated rubber ball and socket system allows the user to achieve ergonomic viewing and typing angles. If you're a mobile professional, this product was designed for you.Material:High Strength Composite ...
"Wall Bracket Mount"
The LA-10C is the most versatile of all the simple brackets. There are two plates, one for the wall and the other for the LCD TV. You simply mount the wall plate to the wall, and the 100mm Vesa mount to the rear of the LCD TV. Then slide the LCD TV onto the wall bracket. The plate is designed with a long wedge shape which allows the LCD TV to remain fixed to the wall under the most adverse conditions.This is the plate which can be used with the LA-55-2 and LA-55-3. Weight Capacity: 20 kg (44 lbs), Screen Size: 26", Material: Iron, Mounting Option: Fixed Wall Mount, Sits: 31 mm from the wall, Display Capacity: VESA 100/100mm
This table is the same as SeaSucker's Medium Table with 6" SeaSucker, but with a different mount - instead of attaching the SeaSucker directly to your gunwale, this table has an "L" bracket that allows you to mount the included 4A1/2" SeaSucker to the inside wall in a vertical position while the table sits on a horizontal surface. Use this custom-designed table to cut bait and rig lines, to filet your catch or to serve it up to your guests. Made of 1/2" white starboard, this table is incredibly sturdy. Open corners allow you to easily dispose of waste overboard and knife slots in the back corners provide convenient and safe storage. Work surface is approximately 22" x 12".
"Flexible Arm Mount"
The LA Series is ergonomically designed to work with multiple moving points for use with most installations while providing flexible movement.With many installations having the need for the product to be in two or more places, the LA Series is fully adaptable for multiple locations. With the use of the LA-10C you can fix the plates to the wall and then simply slide the LA-55-3 on or off to move to any location, or even mount the TV directly to the wall plate.These brackets have been designed to be used in moving or stationary situations, with or without the TV being attached. Weight capacity: 12 kg (26.4 lbs), Tilt: 180 degrees up and down, Rotation: 270 for portrait or landscape viewing, Material: High quality aluminum alloy, Mounting Option: 180 degrees, 270 degrees (wall, display), Pivot: 180 degrees, 270 degrees, 270 degrees (wall, arm, display), Extension: 191.5 mm, Display Compatibility: VESA ...
The RAM Composite Universal Finger Grip? Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. This mount is designed to hold the following devices:Cell Phones2-Way RadiosGPS DevicesHeight Dimensions:Minimum with Top and Bottom Plates: 5.25"Maximum with Top and Bottom Plates: 6.0"The top and bottom plates can be removed for larger devices.Spine Plate Dimensions: 2.5W x 5.0H"Using Short Arm Side Clamps:Maximum Depth: 0.75"Minimum Width: 1.25"Maximum Width: 3.0"Using Medium Arm Side Clamps:Maximum Depth: 1.25"Minimum Width: 1.5"Maximum Width: 3.5"Using Long Arm Side Clamps:Maximum Depth: 1.6"Minimum Width: 2.25"Maximum Width: 3.5" Material:High Strength CompositeNote:The "U" in ...
Universal Vehicle Laptop MountPart #: LTM-MS-525Product DescriptionThe Universal Vehicle Laptop Mount is a heavy duty in-vehicle computer laptop mount for the computer user on the go.Designed for the professional road warrior that needs a sturdy and flexible mounting system for their laptop computer.Our Bracketron laptop mount is made from heavy duty 30mm aluminum tubing and high strength alloy locking joints creating a solid and rugged mount for your laptop.The Bracketron system secures to the passengers side seat bolt utilizing a quick release fitting. The mount can be remove easily in seconds or just folded and locked in place on the floor, out of the way, and ready for use the next time it's needed.The quick release telescoping lower arm provides easy adjustment for height and position and also allows the deck to swing out of the way when not in use.Adjusting the computer angle is controlled easily with the professional ...
"Steel Arm Mount"
This is a complete kit including motor, arm and blade, designed for interior mounting locations. It comes in a choice of sweep angles, and windshield frame or deck mounting options. 12 volt, single speed motor; max. current draw is 2 amps Corrosion-resistant aluminum alloy case with black crackle finish Adjustable right or left self-parking Windshield frame mount ( 3/8 x 2- 1/2 shaft) or deck mount ( 1/2 x 3- 1/2 shaft) Includes stainless steel arm adjustable from 6- 3/4 to 10- 1/2 (AFI 33006AS) Includes deluxe 11 SS, multi-support, curved blade (AFI 33004) Deck Mount version includes deck mount adapter kit (AFI 33000)
This is a complete kit including motor, arm and blade, designed for interior mounting locations. It comes in a choice of sweep angles, and windshield frame or deck mounting options. 12 volt, single speed motor; max. current draw is 2 amps Corrosion-resistant aluminum alloy case with black crackle finish Adjustable right or left self-parking Windshield frame mount ( 3/8 x 2- 1/2 shaft) or deck mount ( 1/2 x 3- 1/2 shaft) Includes stainless steel arm adjustable from 6- 3/4 to 10- 1/2 (AFI 33006AS) Includes deluxe 11 SS, multi-support, curved blade (AFI 33004) Deck Mount version includes deck mount adapter kit (AFI 33000)
Roll bar tube clamp for mounting your quick-release GoPro camera on to tubes & frames ranging from 1.4" to 2.5" (3.5cm - 6.35cm) in diameter. Perfect for clamping your camera to the radiator cap (both metal and plastic caps) on karts. You can also clamp to bike frames, bumper bars, ski/surfboard racks, or anything else that is in the size range above. Comes with pivoting orientation arms allowing for 3-way adjustability, ensuring you can get the angle you want. Compatible with all GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE HERO cameras. Not compatible with the Digital HERO 5 Wrist Camera. What's Included: 1 Roll Bar/Tube Clamp, 1 Three-way Adjustable Pivot Arm (three piece assembly), Warranty: One Year
"Double Arm Mount"
RAM Double Socket Arm for 1" Ball BasesThe RAM-B-201U, standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 3.69"Socket-To-Socket Length: 3" Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size
The RAM-B-201U powder coated marine grade aluminum 6.88" double socket arm allow for connnection to a 2.25" diameter ball. Socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions:Overall Length: 8.375"Socket-To-Socket Length: 6.5625" Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball "D" Size
RAM Long Double Socket Arm for 1.5" Ball BasesThe RAM-201U-D, LONG double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 9.125"Socket-To-Socket Length: 8.75" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size
