Print This Page
Gallon
Save 25%
Early Bird Special! $22.49
Expires 5-1-05
[1 of 1 customers found this review helpful]
Comments about Evercoat Boatyard Marine Resin - Gallon:
flows very well, thinner then most I have used.But be careful of how much harder you use.I found 6cc to 8cc per quart works very well.It cures over 24 hours at 70º to 80ºf. to a very solid hard surface. I have used 5 gallon on a boat floor using 1.5oz. mat then 18oz.cloth.For the price you cannot beat it.I have use many brands this is the best quality for the price.I like the way it soaks into the fiberglass mat, I used a roller to apply the resin.Produced a smooth flat finish.Get a good quality fiberglass mat and cloth. I hope this helps.
[1 of 1 customers found this review helpful]
from Palm Coast, FL on 4/4/2007
Comments about Evercoat Boatyard Marine Resin - Gallon:
Be careful when adding the hardener, It calls for 11cc per quart of resin used. The fist batch I mixed I used 11cc and it cure in the pot before I was halfway done using it, less than 8 min. The second batch I used 8cc and I had about a 20 min work time, which was plenty, it cured fine overnight.
from Rhode Island on 3/26/2007
Comments about Evercoat Boatyard Marine Resin - Gallon:
not a bad glass for the price im sure theres better out there but not bad at all overall