Print This Page
Brand:
Rule
Located in:
Bilge Pumps
Rule-Mate® 2000
Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.
Fully Automated Bilge Pump
Rule introduces the rule-mate™ series of bilge pumps. The rule-mate consists of a powerful rule bilge pump and a new non-mecury float switch in a single housing. While fully automated, the pump will only turn on when the water level rises. There is no cycling and battery drain. The pump remains off until the internal float switch rises. The pump then stays on until the water is evacuated. The pump's internal computer senses no load (Water) against the impeller and then shuts off. A detachable strainer provides easy access to the impeller area for removal of debris. Each pump is easily installed with the pump and switch internally wired. A third wire allows the pump to be connected to a manual override switch if so desired. The rule-mate bigle pump is thoughtfully designed, and due to its compact profile, can be used in practically all bilge pumping applications.
Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.
Fully Automated Bilge Pump
Rule introduces the rule-mate™ series of bilge pumps. The rule-mate consists of a powerful rule bilge pump and a new non-mecury float switch in a single housing. While fully automated, the pump will only turn on when the water level rises. There is no cycling and battery drain. The pump remains off until the internal float switch rises. The pump then stays on until the water is evacuated. The pump's internal computer senses no load (Water) against the impeller and then shuts off. A detachable strainer provides easy access to the impeller area for removal of debris. Each pump is easily installed with the pump and switch internally wired. A third wire allows the pump to be connected to a manual override switch if so desired. The rule-mate bigle pump is thoughtfully designed, and due to its compact profile, can be used in practically all bilge pumping applications.
Review Snapshot®
Avg. Customer Rating:
3 stars
(based on 3 reviews)
67% of respondents would recommend this to a friend.
Replacement pump
By Mike
from Seattle, WA on 12/29/2010
from Seattle, WA on 12/29/2010
Pros:
Attractive Design, Easy To Install, Quality Construction
Best Uses:
Large Boats, Pontoon Boats, Sailing, Small Boats
Describe Yourself:
Advanced
Was this a gift?:
No
Bottom Line:
Yes, I would recommend this to a friend
Comments about Rule Rule Mate® 2000 G.P.H. Automatic Bilge Pump:
This is one of 4 Rule Mate 2000s I have on board. The boat is 5 years old and this is the first one that has given me any problem. The impeller was frozen. The replacement went in without a hitch and works fine.
Not reliable
By No rule from Florida on 5/3/2010
Pros:
Easy To Use
Cons:
Not rliable
Best Uses:
Small Boats
Describe Yourself:
Casual/ Recreational
Bottom Line:
No, I would not recommend this to a friend
Comments about Rule Rule Mate® 2000 G.P.H. Automatic Bilge Pump:
I have had to replace twice in four years. Will not buy another.
Dry bilge now
By Rockindk from Alameda, CA on 8/14/2008
from Alameda, CA on 8/14/2008
Pros:
Durable, Good Value, High Quality
Bottom Line:
Yes, I would recommend this to a friend
Comments about Rule Rule Mate® 2000 G.P.H. Automatic Bilge Pump:
Was very easy to install. Started working immediately. Have 3 on my boat.