- Flush Surface Mount
- Bronze Surface Mount
- Profile Flush Mount
- Scotty Flush Mount
- Polished Flush Mount
- Stainless Steel Flush Mount
- Dual Flush Mount
- Ram Flush Mount
- Cannon Gimbal Mount
- Scotty Flush Deck Mount
- Lees Tackle Chrome Flush Mount Rod
- C.e Smith Flush Mount Rod Holder
- Underwater Light Mounting
- Perko Flush Mount Fishing Rod Holder
- Rod Holder Mount
- Humminbird Lowrance By Category Marine Electronics Price
- Flush Mount Fishing Rod Holders
- Standard Horizon By Category Fishfinders Depth Sounders
- Lees Tackle Stainless Steel Flush Mount
- Flush Mount Rod Holder
Bronze Flush Mount
Chrome plated cast bronze body with brass screen Exterior surface of flange is machined flat and designed to be countersunk into the deck, resulting in a smooth external fit Threaded with male straight pipe thread Marine UL listed
Chrome plated cast bronze body with brass screen Exterior surface of flange is machined flat and designed to be countersunk into the deck, resulting in a smooth external fit Threaded with male straight pipe thread Marine UL listed
Chrome plated bronze flange. Chrome plated brass tube. Soft black liner and flange gasket with integral flip-up cap. Tube ID: -1 5/8 Tube OD: 2 Length under Flange: 8
The Flush Mount has an exceptionally low profile giving it virtually unlimited hull mounting options. This light can be retrofitted into most existing underwater lighting hole cut-outs, offering immediate benefits of no startup power surge, low heat, minimal maintenance and improved light output. Ideally suited for boats of 65' (20m) or above using 4 or more lights per side with spacing of 4-8' (1.2-2.4m). A very quick-to-fit light using Deutsch plug-and-play quick connect electrical installation system. Suitable for Fiberglass, GRP and wooden hulls, and now also available for use on aluminium/steel hulls using the Delrin Sleeve option. 4-?" Hole - Easy to Retrofit, Equal to 150w HID/Metal Halide, 12/24vDC, 180 Beam, 40,000+ Hour Life, Aluminium Bronze AB2, Plug & Play, Factory Sealed Unit, No Breakable Parts
SDD-110 Seawater Depth Indicator w/Bronze Thru-Hull TransducerThe SDD-110 operates on working frequency of 120kHz, so it won't interfere with other onboard echosounders. This compact unit - measuring only 4.3" X 4.3" X 3.5" - uses Digital Signal Processing (DSP) technology to deliver accurate digital depth readings from 1.5' to 1,375' in easy-to-read numerals. The large four-digit LCD display offers five levels of backlighting, for optimum visibility in all ambient light conditions.Because the SDD-110 is a one-piece system, it doesn't require a black-box sounder or the complicated wiring associated with network sounders. Instead, the 120kHz transducer plugs directly into the back of the unit for fast and easy installation. The SDD-110 uses an inexpensive flush-mount 2" thru-hull transducer with a 38-degree beam angle. This allows for easy installation and proper beam orientation on most hulls without the need for a fairing block. In addition to providing precise water depth data, ...
Bronze Thru hull TransducerBronze Thru-Hull Transducers are for large boats and for boats with in-board motors that make typical Transom Mount Transducers ineffective. They are not recommended for trailered boats as the transducer is not flush with the hull. Bronze Thru-Hull Transducers require that a hole be drilled in the hull and the shaping of a fairing block. Professional installation is recommended. Plastic Thru-Hull Transducers are an alternative to Bronze Thru-Hull TransducersDescription: Bronze thru hull transducer, dual beam, 1 kilowatt, 200/50kHz. Transducer dimensios: 7"L X 4.2"W X 1.5"D. Fairing block not included.For Use With: 931C DF, 937C DF, FB1KW
"Rod Holder Flush Mount"
Polished stainless steel flange, stainless steel tube, soft black liner and flange gasket with integral flip-up cap. Tube ID: 1- 5/8 Tube OD: 2 Length under flange: 8- 1/4 Flange: 4- 1/8 x 3- 3/8
Scotty? Striker Rod Holder - STRIKER ROD HLDR W/244 FLUSH MOUNT
AII new slim line stainless steel construction with UV resistant PVC cap and soft PE liner. This new design has the same liner and cap that is used on the cast stainless steel rod holder, Mfg# 325235.
"Steel Flush Mount"
Flush Mount Rod HolderRH-527VS Medium 0 Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
Swivel Base Rod HoldersRH579XLHalf Angle 15 Extra Long TubeStainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of ...
Swivel Base Rod HoldersRH575Standard Angle 30Stainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip ...
"Silver Flush Mount"
Ideal for bent butt rod fishing, Smith swivel base rod holders allows anglers to fight the fish without removing the pole from the rod holder! Precision machine 1/2? pivot with fine threads and Teflon clutch for smooth swivel action.
Ideal for bent butt rod fishing, Smith swivel base rod holders allows anglers to fight the fish without removing the pole from the rod holder! Precision machine 1/2? pivot with fine threads and Teflon clutch for smooth swivel action.
Made of 100% 316 stainless steel, featuring an extra large, low profile cap and a super tough stainless steel gimbal bar welded in place designed to take the punishment of downriggers or heavy tackle. White Vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. Highly polished Silver finish, with a heavy-duty 100% welded tube-to-cap joint which will not break out.
"Polished Flush Mount"
Red and green lens. Highly polished stainless steel side light., Size: 7-3/4"L x 2-1/2"H x 2-3/4"D.
Available in polished stainless or black Available with traditional hoodsliding closure PowerDamp Performance flat card dials Extra 90 lubber lines for easy reading of reciprocal headings Full internal gimbals Hardened steel pivot and sapphire jewel movement Built-in compensators 12 volt green night lighting Spherical design with fiberglass reinforced Valox bowl High-capacity roller diaphragm for extended temperature operating ranges 100 repairability Exclusive 5-year Ritchie warranty Protective cover available
Dual Locking Flush Deck Socket MountTwo attractive mirror polished 18-8 stainless steel flush deck socket sets, features a push button lock pin and includes a flange gasket with integral flip-up water seal cap. These sockets mount flush for an uncluttered deck. Some fasteners required for installation.
"Chrome Flush Mount"
Flush Mount Rod HolderRH-530 Large 30 Chrome on BrassThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
Easily installs in a 2-1/2 diameter hole for mounting surfaces 1/8 to 3/4 thick. The T-handle drops down flush in either the ppen or closed (180 rotation) position (except with the offset cam bar positioned upward) Rubber seal and boot under the T-handle seals the lock cylinder preventing water intrusion White body with chrome T-handle Includes special nut for mounting to underneath deck or a hatch
Chrome plated zinc alloy flange Anodized aluminum tube Soft black liner and flange gasket with integral flip-up cap Tube ID: 1- 5/8 Tube OD: 2 Length: 8 Flange dimension: 4- 1/4 x 3- 1/2
