Free Shipping & Handling* on qualifying orders over $100
No Sales Tax
Low Prices & Satisfaction Guaranteed
On-deck or on-dock small boat storage is typically handled by expensive, custom-made boat cradles or dinghy davits. Buck Woodcraft offers a simple boat storage unit made up of strong, durable rail dinghy chocks that easily adapt to a variety of small-boat hull forms: RIB dinghies, rowing skiffs, jet skis and other personal watercraft. Fabricated out of King Starboard - a marine-grade polymer that has a life expectancy that matches or exceeds fiberglass these chocks never need painting or refinishing, resist most stains, won't chip or corrode, and won't chip or scratch fiberglass hulls. Nautilus Rail Chocks and bases are 1-1/2'' thick, and all edges are rounded and milled smooth. Rails measure approximately 5''W x 4'L, and each rail is supported by two bases, each measuring approximately 6''H x 10-1/2''W. The finished structure weighs less than 30 lbs., yet is extremely strong and will easily support the weight of just about any PWC, RIB dinghy or other small to medium-size tender. Nautilus Rail Chocks are designed to pivot on their bases up to 20 degrees from vertical, so your small-craft hull will sit flush against the full width of the rails' edges along their entire length. Once you've determined the correct rail angle for your hull by placing it on the chocks, drill pilot holes through the rails into each base and lock them together with the included stainless steel screws. (Correct drill bit also included). If you ever get a different dinghy, just remove the screws and repeat the process for your new hull. It's that simple! Nautilus Rail Chock bases are pre-drilled to help simplify through-deck installation. Although Nautilus Rail Chocks are very strong, they are not designed or intended as tie-down points for your dinghy or other small boat.
Includes 2 Nautilus Rail Chocks and 4 Mounting Bases
Packaged with the hardware and proper drill bit for locking the rails to the base units
